pub struct StderrReadFramedReader<R, W> {
    reader: R,
    writer: W,
    state: StderrReaderState,
}
Expand description

Implements the reader protocol for STDERR_READ in nix protocol version 1.21..1.23.

See logging.md#stderr_read and StderrReaderState for details.

FUTUREWORK: As per the nix protocol, it should be possible to send logging messages concurrently with reads, however this reader currently monopolizes the writer until eof is reached or the writer is dropped. It’s important we don’t allow certain interleavings of log writes, i.e. it’s not ok to issue a log message right after we’ve requested STDERR_READ, but before requesting the length.

Fields§

§reader: R§writer: W§state: StderrReaderState

Implementations§

source§

impl<R, W> StderrReadFramedReader<R, W>

source

pub fn new(reader: R, writer: W) -> Self

Trait Implementations§

source§

impl<R: AsyncRead, W: AsyncWrite> AsyncRead for StderrReadFramedReader<R, W>

source§

fn poll_read( self: Pin<&mut Self>, cx: &mut Context<'_>, read_buf: &mut ReadBuf<'_>, ) -> Poll<Result<()>>

Attempts to read from the AsyncRead into buf. Read more
source§

impl<'__pin, R, W> Unpin for StderrReadFramedReader<R, W>
where __Origin<'__pin, R, W>: Unpin,

Auto Trait Implementations§

§

impl<R, W> Freeze for StderrReadFramedReader<R, W>
where R: Freeze, W: Freeze,

§

impl<R, W> RefUnwindSafe for StderrReadFramedReader<R, W>

§

impl<R, W> Send for StderrReadFramedReader<R, W>
where R: Send, W: Send,

§

impl<R, W> Sync for StderrReadFramedReader<R, W>
where R: Sync, W: Sync,

§

impl<R, W> UnwindSafe for StderrReadFramedReader<R, W>
where R: UnwindSafe, W: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

source§

fn chain<R>(self, next: R) -> Chain<Self, R>
where Self: Sized, R: AsyncRead,

Creates a new AsyncRead instance that chains this stream with next. Read more
source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self>
where Self: Unpin,

Pulls some bytes from this source into the specified buffer, returning how many bytes were read. Read more
source§

fn read_buf<'a, B>(&'a mut self, buf: &'a mut B) -> ReadBuf<'a, Self, B>
where Self: Unpin, B: BufMut + ?Sized,

Pulls some bytes from this source into the specified buffer, advancing the buffer’s internal cursor. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
source§

fn read_u8(&mut self) -> ReadU8<&mut Self>
where Self: Unpin,

Reads an unsigned 8 bit integer from the underlying reader. Read more
source§

fn read_i8(&mut self) -> ReadI8<&mut Self>
where Self: Unpin,

Reads a signed 8 bit integer from the underlying reader. Read more
source§

fn read_u16(&mut self) -> ReadU16<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_i16(&mut self) -> ReadI16<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_u32(&mut self) -> ReadU32<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_i32(&mut self) -> ReadI32<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_u64(&mut self) -> ReadU64<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_i64(&mut self) -> ReadI64<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_u128(&mut self) -> ReadU128<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_i128(&mut self) -> ReadI128<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in big-endian order from the underlying reader. Read more
source§

fn read_f32(&mut self) -> ReadF32<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in big-endian order from the underlying reader. Read more
source§

fn read_f64(&mut self) -> ReadF64<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in big-endian order from the underlying reader. Read more
source§

fn read_u16_le(&mut self) -> ReadU16Le<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_i16_le(&mut self) -> ReadI16Le<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_u32_le(&mut self) -> ReadU32Le<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_i32_le(&mut self) -> ReadI32Le<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_u64_le(&mut self) -> ReadU64Le<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_i64_le(&mut self) -> ReadI64Le<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_u128_le(&mut self) -> ReadU128Le<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_i128_le(&mut self) -> ReadI128Le<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in little-endian order from the underlying reader. Read more
source§

fn read_f32_le(&mut self) -> ReadF32Le<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in little-endian order from the underlying reader. Read more
source§

fn read_f64_le(&mut self) -> ReadF64Le<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in little-endian order from the underlying reader. Read more
source§

fn read_to_end<'a>(&'a mut self, buf: &'a mut Vec<u8>) -> ReadToEnd<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, placing them into buf. Read more
source§

fn read_to_string<'a>( &'a mut self, dst: &'a mut String, ) -> ReadToString<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, appending them to buf. Read more
source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adaptor which reads at most limit bytes from it. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> Same for T

source§

type Output = T

Should always be Self
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more