Struct prost_wkt_types::FieldMask

pub struct FieldMask {
    pub paths: Vec<String>,
}

FieldMask represents a set of symbolic field paths, for example:

paths: "f.a"
paths: "f.b.d"

Here f represents a field in some root message, a and b fields in the message found in f, and d a field found in the message in f.b.

Field masks are used to specify a subset of fields that should be returned by a get operation or modified by an update operation. Field masks also have a custom JSON encoding (see below).

Field Masks in Projections

When used in the context of a projection, a response message or sub-message is filtered by the API to only contain those fields as specified in the mask. For example, if the mask in the previous example is applied to a response message as follows:

f {
   a : 22
   b {
     d : 1
     x : 2
   }
   y : 13
}
z: 8

The result will not contain specific values for fields x,y and z (their value will be set to the default, and omitted in proto text output):

f {
   a : 22
   b {
     d : 1
   }
}

A repeated field is not allowed except at the last position of a paths string.

If a FieldMask object is not present in a get operation, the operation applies to all fields (as if a FieldMask of all fields had been specified).

Note that a field mask does not necessarily apply to the top-level response message. In case of a REST get operation, the field mask applies directly to the response, but in case of a REST list operation, the mask instead applies to each individual message in the returned resource list. In case of a REST custom method, other definitions may be used. Where the mask applies will be clearly documented together with its declaration in the API. In any case, the effect on the returned resource/resources is required behavior for APIs.

Field Masks in Update Operations

A field mask in update operations specifies which fields of the targeted resource are going to be updated. The API is required to only change the values of the fields as specified in the mask and leave the others untouched. If a resource is passed in to describe the updated values, the API ignores the values of all fields not covered by the mask.

If a repeated field is specified for an update operation, new values will be appended to the existing repeated field in the target resource. Note that a repeated field is only allowed in the last position of a paths string.

If a sub-message is specified in the last position of the field mask for an update operation, then new value will be merged into the existing sub-message in the target resource.

For example, given the target message:

f {
   b {
     d: 1
     x: 2
   }
   c: \[1\]
}

And an update message:

f {
   b {
     d: 10
   }
   c: \[2\]
}

then if the field mask is:

paths: [“f.b”, “f.c”]

then the result will be:

f {
   b {
     d: 10
     x: 2
   }
   c: \[1, 2\]
}

An implementation may provide options to override this default behavior for repeated and message fields.

In order to reset a field’s value to the default, the field must be in the mask and set to the default value in the provided resource. Hence, in order to reset all fields of a resource, provide a default instance of the resource and set all fields in the mask, or do not provide a mask as described below.

If a field mask is not present on update, the operation applies to all fields (as if a field mask of all fields has been specified). Note that in the presence of schema evolution, this may mean that fields the client does not know and has therefore not filled into the request will be reset to their default. If this is unwanted behavior, a specific service may require a client to always specify a field mask, producing an error if not.

As with get operations, the location of the resource which describes the updated values in the request message depends on the operation kind. In any case, the effect of the field mask is required to be honored by the API.

Considerations for HTTP REST

The HTTP kind of an update operation which uses a field mask must be set to PATCH instead of PUT in order to satisfy HTTP semantics (PUT must only be used for full updates).

JSON Encoding of Field Masks

In JSON, a field mask is encoded as a single string where paths are separated by a comma. Fields name in each path are converted to/from lower-camel naming conventions.

As an example, consider the following message declarations:

message Profile {
   User user = 1;
   Photo photo = 2;
}
message User {
   string display_name = 1;
   string address = 2;
}

In proto a field mask for Profile may look as such:

mask {
   paths: "user.display_name"
   paths: "photo"
}

In JSON, the same mask is represented as below:

{
   mask: "user.displayName,photo"
}

Field Masks and Oneof Fields

Field masks treat fields in oneofs just as regular fields. Consider the following message:

message SampleMessage {
   oneof test_oneof {
     string name = 4;
     SubMessage sub_message = 9;
   }
}

The field mask can be:

mask {
   paths: "name"
}

Or:

mask {
   paths: "sub_message"
}

Note that oneof type names (“test_oneof” in this case) cannot be used in paths.

Field Mask Verification

The implementation of any API method which has a FieldMask type field in the request should verify the included field paths, and return an INVALID_ARGUMENT error if any path is unmappable.

Fields

paths: Vec<String>

The set of field mask paths.

Trait Implementations

impl Clone for FieldMask

fn clone(&self) -> FieldMask

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for FieldMask

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for FieldMask

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for FieldMask

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Message for FieldMask

fn encoded_len(&self) -> usize

Returns the encoded length of the message without a length delimiter.

fn clear(&mut self)

Clears the message, resetting all fields to their default.

fn encode(&self, buf: &mut impl BufMut) -> Result<(), EncodeError>

where Self: Sized,

Encodes the message to a buffer.

fn encode_to_vec(&self) -> Vec<u8>

where Self: Sized,

Encodes the message to a newly allocated buffer.

fn encode_length_delimited( &self, buf: &mut impl BufMut, ) -> Result<(), EncodeError>

where Self: Sized,

Encodes the message with a length-delimiter to a buffer.

fn encode_length_delimited_to_vec(&self) -> Vec<u8>

where Self: Sized,

Encodes the message with a length-delimiter to a newly allocated buffer.

fn decode(buf: impl Buf) -> Result<Self, DecodeError>

where Self: Default,

Decodes an instance of the message from a buffer.

fn decode_length_delimited(buf: impl Buf) -> Result<Self, DecodeError>

where Self: Default,

Decodes a length-delimited instance of the message from the buffer.

fn merge(&mut self, buf: impl Buf) -> Result<(), DecodeError>

where Self: Sized,

Decodes an instance of the message from a buffer, and merges it into self.

fn merge_length_delimited(&mut self, buf: impl Buf) -> Result<(), DecodeError>

where Self: Sized,

Decodes a length-delimited instance of the message from buffer, and merges it into self.

impl MessageSerde for FieldMask

fn package_name(&self) -> &'static str

package name as in proto file

fn message_name(&self) -> &'static str

message name as in proto file

fn type_url(&self) -> &'static str

the message proto type url e.g. type.googleapis.com/my.package.MyMessage

fn new_instance( &self, data: Vec<u8>, ) -> Result<Box<dyn MessageSerde>, DecodeError>

Creates a new instance of this message using the protobuf encoded data

fn try_encoded(&self) -> Result<Vec<u8>, EncodeError>

Returns the encoded protobuf message as bytes

impl Name for FieldMask

const PACKAGE: &'static str = "google.protobuf"

Package name this message type is contained in. They are domain-like and delimited by ., e.g. google.protobuf.

const NAME: &'static str = "FieldMask"

Simple name for this Message. This name is the same as it appears in the source .proto file, e.g. FooBar.

fn type_url() -> String

Type URL for this Message, which by default is the full name with a leading slash, but may also include a leading domain name, e.g. type.googleapis.com/google.profile.Person. This can be used when serializing into the google.protobuf.Any type.

fn full_name() -> String

Fully-qualified unique name for this Message. It’s prefixed with the package name and names of any parent messages, e.g. google.rpc.BadRequest.FieldViolation. By default, this is the package name followed by the message name. Fully-qualified names must be unique within a domain of Type URLs.

impl PartialEq for FieldMask

fn eq(&self, other: &FieldMask) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for FieldMask

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for FieldMask